Sampling cooler

Introduction to sampling coolers of soda: Soda sampling cooler is used for power plants, power stations, steel smelting, chemical industry, textiles, printing and dyeing and other boiler room furnace water and soda sampling coolant. , While high temperature is not easy to sampling, and it is not convenient to determine. Side sampling cooler can cool the furnace water to (30-40 degrees), cool the steam into water and cool to (30-40 degrees), which is convenient for operators to safely sampling and reaches the temperature of the cooling medium to less than 30-40 degrees. Met the sampling test requirements.

Overview of boiler sampling cooler: Soda sampling cooler, stove water sampling cooler/boiler sampling cooler is used for power plants, power stations, steel smelting, chemical, textiles, printing and dyeing and other boiler water, water sampling cooler coolant, and the species series: Steam sampling cooler, furnace water sampling cooler, sampling cooler, hydrophobic sampling cooler, and condensed sample cooler. The temperature of the boiler and thermal-water and steam is high, while high temperatures are not easy to sample and are inconvenient to determine. Sampling cooler can cool the furnace water to (30-40 degrees), cool the steam into water and cool to (30-40 degrees) to facilitate the safe sampling and reaching the temperature of the cooling medium to below 30-40 degrees, and the sampling is taken. The cooler can meet the standards of the-Hua-Republic-Electric Power Industry DL/T457-91, and meet the sampling test requirements.

The main application sampling-position:

Project sampling-Name sampling-location

Exit the water tank export to the water tank after taking the sample divorce of the water

Provincial Coal Master-Give Watermaker Coal Lifting-

Furnace water sampling points-evaporating boiler furnace water according to the requirements of the boiler factory

Saturated steam sampling score-evaporate boiler saturated steam

The heat device sampling high and low temperature before thermal steam

Sampling of overheated heat steam and temperature -excessive steamers

Single of condensation water-evaporating boiler condensate water exit

Hydrophobic heater Hydividation Heater Exit

Hydrophobic hydrophobic tank hydrophobic export

Hydrophobic water dredging export of heater

Production back to the water to pick up the water tank and return water to the water pipe and exit

Rehabilitation water sampling homemade cooling water self -made condensate pipe

Remarks: Of course, there are other liquid or gas samples such as sampling medium water, steam and other liquid or gas sampling, etc., can use sampling cooler-overheating sampling difficulty problems. Sample sampling of furnace water sampling cooler-location detailed diagram:

Boiler sampling device cooler-: Singlery sample cooler consists of 9 types of accessories of 9 types of accessories 1. Cooling water into the water inlet 2. Cooling pipe 3. Shells 4, ontology 7. Cooling medium sampling port (Here the medium of furnace water sampling cooler-medium can be water, steam and other liquid or gas sampling, etc.) 8. Cooling water outlet water outlet 9. Install the leg sampling sampling of the cooler sampling device Equipment. The

Precautions for furnace water sampling cooler: The sampled catheter uses stainless steel pipes. Carbon steel pipes or bronze pipes cannot be used.

Technical requirements for furnace water sample cooler: 1. Single sampling of soda soda

Tube replacement of tubular oil cooler

When purchasing a column type oil cooler for tube and core replacement, the cooling area should be informed. The cooling forms are divided into LY type light tube (for use) and LYC type fin type. Stainless steel tubes are generally selected for heat exchange and cooling, and purple copper, brass, and titanium tubes can also be selected as heat exchange components according to user needs.

Steam -seal cooler

The role of a steam -seal cooler is to make the tram from the steam turbine slightly negative pressure, so that the auto continuously enters the auto seal cooler through the auto pipeline and condenses it into water for the boiler to use it.

Shaft seal cooler

The shaft seal cooler is used to extract the gas-liquid mixture from the steam seal system of the steam turbine, preventing steam from flowing from the end seal to the turbine room and oil system, thereby polluting the environment and damaging the oil quality. Generally, a shaft seal heater (shaft seal cooler) is used to heat condensate and recover shaft seal steam.

Oil cooler tube replacement and maintenance

We are a manufacturer of oil cooler tube replacement and maintenance. We undertake various types of tube coolers, condensers, oil coolers, chillers, air coolers, condensers, and other heat exchange and cooling tube replacement and renovation projects. Change the material of the pipes, such as copper pipes, stainless steel pipes, titanium pipes, etc.

Replacing pipes for marine oil coolers

Welded steel pipes (also known as slotted pipes and welded pipes) are mainly used for auxiliary machinery in industries such as thermal power generation, chemical industry, and steel, such as condenser and heater pipe replacement, tubular marine oil cooler pipe replacement, oil-water cooler pipe replacement, tubular marine oil cooler pipe replacement, and Le tube cooler pipe replacement.

Tubular oil cooler

The column tube oil cooler is a turbine oil cooling equipment used in conjunction with power system steam turbines. The column tube oil cooler is a smooth tube surface type, using circulating water as the medium for on-site heat exchange to ensure that the inlet oil temperature of the bearing reaches the specified value and ensure the normal operation of the unit.

Sealing cooler tube replacement

The steam seal cooler generally adopts a horizontal U-shaped surface heat exchanger for pipe replacement, and the pipe material is stainless steel pipe. In addition to expansion joint, the pipe also needs to be sealed and welded with the pipe plate; HSn-70-1 tin brass is also used, which is fixed on the tube plate by expanding the tube bundle to the U-shaped tube end freely.

Air cooler tube replacement

The air cooler adopts finned tube material, single metal finned tube and bimetallic composite finned tube. The single metal finned tube is rolled from aluminum tube as a whole, with contact thermal resistance, high strength, thermal and mechanical vibration, thermal expansion energy, and considerable expansion heat transfer surface.

Soda Sampling cooler

The steam Sampling cooler is suitable for Sampling media such as liquids and vapors with high temperatures. The steam Sampling cooler adopts a spiral tube (commonly known as a serpentine coil) surface cooling structure. Sampling catheters are all used for Sampling, which are corrosion-resistant and non polluting.

Blowdown cooler

A sewage cooler is an equipment that uses chemically treated water or raw water to cool sewage or other wastewater. Reduced heat loss while heating chemically treated water, increasing heat rate. It can also be used for cooling or heating water and steam media. There are two forms of sewage coolers: tubular sewage coolers and surface sewage coolers.