Steam water heat exchanger

Overview of HR high water and steam water heat exchangers:

HR high water and steam water heat exchanger is a type of heat exchange equipment that uses the heat of waste gas and wastewater to heat cooling water.

Heating water enters the equipment from the side of the pipe box and passes through a heat exchange surface composed of high 304 stainless steel tubes. There are four processes in total to transfer heat to the heated water, so that the heated water reaches the required temperature. This series of heat exchangers is mainly used for the recovery of industrial waste steam, wastewater and waste heat from chemical boilers in power plants, as well as for the petrochemical environmental protection service industry, and for steam liquid and liquid liquid liquid heat exchange in light industry.

HR high water and steam water heat exchanger is a type of heat exchange equipment that uses the heat of waste gas and wastewater to heat cooling water.

Heating water enters the equipment from the side of the pipe box and passes through a heat exchange surface composed of high 304 stainless steel tubes. There are four processes in total to transfer heat to the heated water, so that the heated water reaches the required temperature.

HR high water and steam water heat exchangers are mainly used for the recovery of industrial waste steam and wastewater from chemical boilers in power plants, as well as for the petrochemical environmental protection service industry, and for steam liquid and liquid liquid liquid heat exchange in light industry.

-Special specifications can be arranged separately according to user needs for design schemes! Interested parties contact us!

Notes on ordering HR high water and steam water heat exchangers:

a. When ordering equipment, it is necessary to indicate in the contract whether accessories are required. If not specified, it will be considered as not equipped with accessories and only for the main body

b. The parameters listed in the table are for reference only, and can be designed and adjusted according to specific user requirements during ordering

HR High Type Water and Steam Water Heat Exchanger Technology -:

HR高-型水水,汽水熱交換器主要接管表：
 

 
HR高-型水水,汽水熱交換器設備附件：
 

 
HR高-型水水,汽水熱交換器外型規格尺寸：
外型尺寸，有意者來電咨詢我們
注意：以上產品技術規格參數僅供參考以實際設計為主。

heat recovery device tube replacement

The waste heat recovery device, also known as the energy collector and recovery device, can be used for boiler waste heat recovery device, deaerator waste heat recovery, continuous discharge expansion tank waste heat recovery, continuous discharge expansion tank waste heat recovery, flue gas waste heat recovery, deaerator exhaust gas recovery, deaerator exhaust Steam recovery, flue gas waste heat recovery, and other purposes.

Steam -seal cooler

The role of a Steam -seal cooler is to make the tram from the Steam turbine slightly negative pressure, so that the auto continuously enters the auto seal cooler through the auto pipeline and condenses it into water for the boiler to use it.

Steam manifold

Our company's main products include: distribution cylinder, collection cylinder, water distributor, water collector, Steam header, and other water tanks, oil tanks, air tanks, cylinders, and other equipment. The distribution cylinder, also known as the distribution drum, is the main supporting equipment for Steam boilers, used in industries such as power generation, petrochemicals, steel, cement, and construction.

Replacing the tube of the shaft seal heater

Manufacturer of shaft seal heaters, also undertaking pipe replacement and renovation of shaft seal heaters, replacing copper pipes, stainless steel pipes, boiler pipes, etc. According to customer needs, the replacement, repair, installation, and restoration of the relevant shaft seal heater pipes must be carried out. The original equipment must be sent to our company for pipe bundle replacement.

Industrial water filter

The rotary industrial water filter is suitable for filtering impurities such as household waste, industrial waste, floating grass, fish and shrimp, snails, etc. in water supply pipelines of thermal power plants, hydropower stations, steel, metallurgy, chemical and other enterprises. A self-developed series of industrial rotary discharge industrial water filters discovered during operation.

Steam seal heater tube replacement and renovation

The Steam seal heater adopts a horizontal U-shaped surface heat exchanger for pipe replacement and transformation. The pipe material is stainless steel pipe, and in addition to expansion joint, the pipe also needs to be sealed and welded with the pipe plate; HSn-70-1 tin brass is also used and fixed on the tube plate by expanding the tube.

Steam silencer

Steam silencers are used for a wide range of Steam emission objects in thermal equipment. Various specifications of boiler Steam silencers can be designed and manufactured based on the user's extracted Steam output, Steam pressure, and connection size.

Tubular heat exchanger

Tubular heat exchanger is a type of heat exchanger widely used in chemical and alcohol production. A tubular heat exchanger mainly consists of a shell, a tube plate, heat exchange tubes, a head, and a baffle. The required materials can be made of ordinary carbon steel, purple copper, or stainless steel respectively.

The principle of Steam jet pump and Steam injector

A Steam injector is a device that is powered by Steam and is needed in modern engineering. It does not require electricity, has no moving or rotating parts, is simple in system, and works reliably, so it is used.

Positive displacement heat exchanger tube exchange

The U-shaped tube is used as a cooling tube for heat exchange tubes, and stainless steel U-shaped tubes are mainly used for various electrical instruments, condensers, heat exchange equipment, heat exchangers, low-pressure heaters, volumetric heat exchangers, boiler related auxiliary equipment, superheaters, heat exchangers, and refrigerators using welded austenitic stainless steel pipes.